Aprilia Caponord Rally Raid - Specifications & Review

Caponord Rally Raid

Article Complete Info

Articleid538060
CategorySport touring
MakeAprilia
ModelCaponord Rally Raid
Year2006

Chassis, Suspension, Brakes & Wheels

FrontbrakesSingle disc
FrontsuspensionMarzocchi 50 mm hydraulic telescopic fork. 200 mm wheel travel. Piston and cartridge motocross type fork hydraulics. Compression adjustment (on RH leg) and rebound adjustment (on LH leg).
Fronttyre110/80-19.
RearbrakesSingle disc
Rearbrakesdiameter272 mm (10.7 inches)
RearsuspensionAluminium alloy swing-arm. New rising rate linkage with APS (Aprilia Progressive System). Sachs hydraulic monoshock with mechanical compression and rebound adjustment and hydraulic preload adjustment.Separate nitrogen reservoir. 200 mm wheel travel.
Reartyre110/80-19.

Engine & Transmission

Borexstroke97.0 x 67.5 mm (3.8 x 2.7 inches)
ClutchMultiple disk in oil bath with patented PPC power-assisted hydraulic control.
Compression10.4:1
CoolingsystemLiquid
Displacement998.00 ccm (60.90 cubic inches)
EnginedetailsTwin, four-stroke
ExhaustsystemTwin stainless steel silencers, one catalyser per silencer.
FuelsystemInjection. Integrated electronic engine management system. Indirect multi-point electronic injection. Lambda probe oxygen sensor in exhaust system. 47 mm diameter throttle bodies.
Gearbox6-speed
IgnitionDigital electronic ignition with TSI (Twin Spark Ignition) with two spark plugs per cylinder. Ignition timing integrated in the injection control system.
LubricationsystemDry sump with separate oil reservoir.
Power92.00 HP (67.2 kW)) @ 8500 RPM
Torque95.00 Nm (9.7 kgf-m or 70.1 ft.lbs) @ 6250 RPM
TransmissiontypefinaldriveChain
Valvespercylinder4

Other Specifications

StarterElectric

Physical Measures & Capacities

Fuelcapacity13.00 litres (3.43 gallons)
Overalllength1,920 mm (75.6 inches)
Seatheight860 mm (33.9 inches) If adjustable, lowest setting.

About Aprilia

Country of Origin: Italy
Founder: Cavaliere Alberto Beggio (later led by Ivano Beggio)
Best Known For: GP-winning two-strokes (RS125/250), RSV superbikes, and cutting-edge electronics

Company History

Aprilia started in Noale after WWII as a bicycle company before pivoting to mopeds and small-displacement motorcycles. Under Ivano Beggio in the 1970s–90s, Aprilia embraced racing as R&D, building fierce RS125/250 two-strokes that produced world champions and taught countless Europeans how a chassis should feel. The brand’s road lineup mirrored podium lessons: lightweight frames, sharp geometry, and brakes from the top shelf. With the RSV Mille, later RSV4, Aprilia brought V-twin then V-4 sophistication to superbikes, pairing compact engines with electronics that arrived early and matured fast—ride-by-wire, APRC traction/wheelie control, and track-calibrated ABS. The Tuono popularized the ‘supernaked’ formula, while the Shiver/Dorsoduro explored middleweight versatility. Scooter successes and the Caponord/Tuareg adventure lines broadened reach without surrendering the handling DNA. Aprilia’s factory in Noale retained a skunkworks spirit, where racing engineers and production teams traded ideas rapidly; the RS-GP MotoGP effort further refined aero and electronics that later influenced streetbikes. Historically, Aprilia matters because it democratized race feel: crisp steering, clear feedback, and tech that flatters riders rather than overwhelms them. Owners speak of precision—bikes that reward clean inputs and repay attention to tire pressures and setup. In the pantheon of Italian marques, Aprilia stands for modernity: less baroque drama, more lap-time logic, and an insistence that every model carry a little paddock in its genes.

Other Years

Bike n Rider logo
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.