2009
Buell Ulysses Police XB12XP - Specifications & Review

Article Complete Info
| Articleid | 755372 |
|---|---|
| Category | Allround |
| Make | Buell |
| Model | Ulysses Police XB12XP |
| Year | 2009 |
Chassis, Suspension, Brakes & Wheels
| Frametype | Aluminium frame with Uniplanar™ powertrain vibration isolation system, fuel in frame |
|---|---|
| Frontbrakes | Single disc |
| Frontbrakesdiameter | 375 mm (14.8 inches) |
| Frontsuspension | 47 mm Showa inverted forks with rearward offset axle, adjustable compression damping, rebound damping and spring preload |
| Fronttyre | 120/70-ZR17 |
| Frontwheeltravel | 165 mm (6.5 inches) |
| Rearbrakes | Single disc |
| Rearbrakesdiameter | 240 mm (9.4 inches) |
| Rearsuspension | Showa coil-over monoshock with remote reservoir and remote spring preload adjustment, fully adjustable (compression damping, rebound damping and spring preload) |
| Reartyre | 180/55-ZR17 |
| Rearwheeltravel | 162 mm (6.4 inches) |
Engine & Transmission
| Borexstroke | 88.9 x 96.8 mm (3.5 x 3.8 inches) |
|---|---|
| Clutch | Wet, multi-plate, compensated |
| Compression | 10.0:1 |
| Coolingsystem | Oil & air |
| Displacement | 1203.00 ccm (73.41 cubic inches) |
| Enginedetails | V2, four-stroke |
| Exhaustsystem | Buell InterActive Exhaust |
| Fuelsystem | Injection. DDFI 3 Electronic Fuel Injection ECM |
| Gearbox | 5-speed |
| Power | 103.00 HP (75.2 kW)) @ 6800 RPM |
| Torque | 113.90 Nm (11.6 kgf-m or 84.0 ft.lbs) @ 6000 RPM |
| Transmissiontypefinaldrive | Belt |
| Valvespercylinder | 2 |
Other Specifications
| Coloroptions | Birch White and Midnight Black |
|---|---|
| Comments | Siren and LED pursuit light package. LED lighting options include Red/Red, Red/Blue, and Blue/Blue. |
Physical Measures & Capacities
| Dryweight | 217.7 kg (480.0 pounds) |
|---|---|
| Fuelcapacity | 16.65 litres (4.40 gallons) |
| Groundclearance | 171 mm (6.8 inches) |
| Powerweightratio | 0.4731 HP/kg |
About Buell
Country of Origin:
United States
Founder:
Erik Buell
Best Known For:
Mass centralization, fuel-in-frame, rim-mounted front brake; XB and 1125/1190 platforms
Company History
Buell Motorcycles, founded by engineer and former racer Erik Buell, reimagined sportbike design around mass centralization and chassis stiffness. Early Buells used Harley-Davidson V-twins in compact frames, evolving into the XB series with fuel stored inside the frame spars and a perimeter (rim-mounted) front brake that reduced unsprung weight. The result was agile steering, fierce mid-corner feedback, and a uniquely American take on the sportbike: torque-rich engines married to short wheelbases and steep geometry. Later, liquid-cooled Rotax-powered 1125 models pushed performance further. Buell’s partnership with Harley-Davidson provided factory resources and dealer reach, but strategic tensions and the 2008–09 downturn led to the brand’s closure under H-D ownership. Erik Buell returned with Erik Buell Racing (EBR), developing 1190cc superbikes that proved competitive yet financially difficult in a niche market. The Buell name has since resurfaced under new stewardship, underscoring how resilient the idea remains. Historically, Buell matters because it asked different questions: What if the frame carried fuel? What if the front rotor’s diameter increased while caliper mass shrank? What if rideability on real roads mattered as much as peak dyno numbers? For riders, a Buell offers character—snappy turn-in, stout midrange, and the feeling that the chassis is a living partner. Love or quibble with the quirks, the brand expanded sportbike vocabulary, leaving an imprint on how engineers and enthusiasts think about where weight lives and how a motorcycle should communicate at the limit.
